Time Programmes - ABB 6136/30M-500 Operating Instructions Manual

Displaying • Select the desired room thermostat.
and/or
• The current operating mode is displayed
modifying
and can be changed if necessary.
the room
thermostat
• Select the operating mode to be
changed.
• Confirm your entry with "OK".
6.6

Time programmes

All switching functions for lighting, blinds or the heating system can also be controlled
automatically using time programmes. A consumer, e.g. a lamp can be switched ON or
OFF on certain days, every day or during the weekend only if desired.
A maximum of 20 electrical units of the EIB/PN system can be controlled at 5 (room
panel) or 10 (control panel) different times each. This allows up to 200 time functions.
Access to the time programmes can be completely blocked or safeguarded by a PIN
code. Now the time programmes cannot be opened or modified by the user. In this case
contact your electrician (see also chapter "Setting of PIN code").
ENG
Fig. 31
21