Calling Up And Saving Light Scenes; Switching Off The Consumers - ABB 6136/30M-500 Operating Instructions Manual

ENG
7.2.2

Calling up and saving light scenes

• Press "Light" button on remote control unit.
- The word "LIGHT" appears in the remote control unit display. This mode is active for
25 seconds. After this, the display goes back to audio/video. Press the LIGHT key one
more time if required.
• Switch the light scenes according to the table below.
„LIGHT+A" in the table means that these two keys must be pressed one after the other
(not simultaneously).
Function
Call up light scene 1
Call up light scene 2
Call up light scene 3
Call up light scene 4
Save light scene 1
Save light scene 2
Save light scene 3
Save light scene 4
7.2.3

Switching off the consumers

When pressing the "STOP" button, all consumers can be switched off with one single
button.
40
Keys to be pressed
LIGHT+A
LIGHT+C
LIGHT+D
LIGHT+F
LIGHT+RECORD+A
LIGHT+RECORD+C
LIGHT+RECORD+D
LIGHT+RECORD+F