Switching And Dimming Of Lamps - ABB 6136/30M-500 Operating Instructions Manual

7.2.1

Switching and dimming of lamps

• Press "Light" button on remote control unit.
- The word "LIGHT" appears in the remote control unit display. This mode is active for
25 seconds. After this, the display goes back to audio/video. Press the LIGHT key one
more time if required.
• Switch the lamps according to the table below.
„LIGHT+1+B" in the table means that these three keys must be pressed one after the
other (not simultaneously).
Function
Lamp 1 ON
Lamp 1 brighter
Lamp 1 OFF
Lamp 1 darker
Lamps 2 – 9 are actuated in the same way as lamp 1.
Lamp 10 ON
Lamp 10 brighter
Lamp 10 OFF
Lamp 10 darker
Keys to be pressed
LIGHT+1+B
LIGHT+1+B (press B permanently)
LIGHT+1+E
LIGHT+1+E (press E permanently)
LIGHT+0+B
LIGHT+0+B (press B permanently)
LIGHT+0+E
LIGHT+0+E (press E permanently)
ENG
39