Sanitizing And Cleaning, Specification - Sharp SWD-78EHL-SL Service Manual

9. Sanitizing and cleaning instructions
9.1： Ozone sterilizing
Ozonator works for 12 seconds every 4 hours.
9.2：Cleaning
(1) Unplug the power, remove drain cap and silicon plug, drain out the water from back, then plug
back the drain seal and cap. CAUTION: water may be hot! And do not forget to plug back the seal
after draining.
(2) Mix lemon acid into the water bottle, Each small bag mix with 2.5L water, twist the probe
assembly on the bottle and close door, then plug power to pump water, switch on heating, switch off
cooling, leave for 24 hours。
(3) Drain water out from the water taps, then drain from the drain cap on the back。
(4) Flush the cooler with good water for 3 times by drain water from the taps and drain cap。
10. Specifications
Model
Description
Features
Power rating
Output/Flow
Temperature
Heater Safety
Sanitizing &cleaning, Specifications
Cool (Cook) Tap
Cold Tap
Hot tap (Toddle safety latch)
LCD display
Ozone sanitizer
Switch for Cold
Switch for Hot
Carry Handle
Rated voltage and range
Current
Power plug
Main fuse
Heater power
Compressor Power
Cold water (<10℃)
Hot water (>80℃)
Cook water
Cold temperature range
Cooling thermostat
Hot temperature range
Heating thermostat
Dry burn thermostat
High temperature fuse
SWD-78EHL-BD
Bottom loader Black and stainless panels
Black - Grey cooking pot Icon
Black - Blue Glass Icon
Black-Red Latch/Red Cup Icon
Sensor Touch
Yes
Yes,water proof cover
Yes,water proof cover
Yes
220V 50Hz (Working range: 160V~240V)
<2.5A
250V, 10A, 2 pins Euro plug
250V 4A
230V/425W ±5%
70W, Max:<100W
Output:4 L/h, Flow:2.2L/min
Output:4 L/h, Flow:1.8L/min
Output:NA, Flow:2L/min
3~10℃
NTC electronic sensor
Constant temperature at setting value
NTC electronic sensor
130℃ bimetal, autorest
192℃ OFF
page 9