Epson FX-870 User Manual page 119

Printing
The selected by the control panel does not print.
font
l
Your software may be overriding your panel setting. Check the
font setting in your application program.
The wrong characters are printed.
l
The wrong character table or the wrong international character
set may be selected. Check the default settings. See page 3-5.
The print position is not what you expect.
Printing starts too high or too low on the page.
l
Adjust the top margin set by your application software. Use
micro feed to adjust the print position.
All text is printed on the same line.
l
Set the automatic line feed on in the default-setting mode so
that the printer automatically adds a line-feed code to each
carriage return. Check the default settings. See page 3-5.
The text is printed with blank lines between the lines
l
Two line-feed signals are being sent. Set automatic line feed off
in the default-setting mode.
The page length does not match the length
l
Change the page-length setting in the default-setting mode. See
page 3-5.
Check the page length set by your application software and
adjust it if necessary.
6-6 Troubleshooting
text.
of
your continuous paper.
of