Adjusting the top-of-form position
The printer feeds the paper to the top-of-form position when it loads
the paper or performs a form feed. This position determines where
the printing begins on the page.
You may need to adjust the top-of-form position when printing on
ready-made forms. To do this, see Adjusting the loading position on
page 3-15.
Note: When you are using the pull tractor, do not use the
OFF
ALT+ EJECT
or
Removing paper from the pull tractor
1. Tear off the paper entering the printer at the perforation.
2. Hold down the
forward and eject it.
buttons.
PAPER FEED
button to feed the continuous paper
Using Continuous Paper
TEAR
Paper Handling
2-19