Changing Group 2 Default Settings - Epson FX-870 User Manual

Default-Setting Mode
FONT
4. The and
selected to change by turning on, off, or blinking. Press the
button as many times as necessary until the
CONDENSED
For example, if you want to change the character spacing, press
FONT
the button until the
light is blinking.
5.
Next, press the
light shows your selection.
For example, if you want to change to 12 cpi, press the
button once to
6. If necessary, repeat this process for any other Group 1 features
you want to change.
7. Exit the Group 1 default-setting mode at any time by turning off
the printer. Any changes you have made remain in effect until
you change them again.
Note: If you want to check the new default settings, enter the
default-setting mode again and print the quick reference. After
that, turn off the printer to exit the default-setting mode.

Changing Group 2 default settings

1. Make sure the printer is turned off.
2. Turn on the printer while you hold down the
buttons. This enters the Group 2 default-setting mode. The
printer beeps once.
3-10 Using the Printer
CONDENSED
lights show which feature you have
lights match your selection.
FONT
PAUSE
button to change the setting. The
turn READY
the
FONT
light is off and the
light on.
FONT
FONT
and
CONDENSED
READY
PAUSE
PAUSE
and