Mitsubishi Electric A800 Instruction Manual page 53

Operation panel (FR-DU08)
6.1.2
Basic operation (factory setting)
Operation mode switchover/Frequency setting
External operation mode
Parameter setting mode (At power-ON)
Parameter setting mode
∗5
Function mode
Long press

For the details of operation modes, refer to the Instruction Manual (Detailed).

Monitored items can be changed. (Refer to the Instruction Manual (Detailed).)

For the details of the trace function, refer to the Instruction Manual (Detailed).

For the details of faults history, refer to the Instruction Manual (Detailed).

The USB memory mode will appear if a USB memory device is connected. Refer to the Instruction Manual (Detailed) for the details of the USB memory mode.
16
DRIVE THE MOTOR
∗1( At power-ON)
Value change
∗2
Parameter clear
Group parameter setting Automatic parameter setting
(Example)
Flickering
Faults history 1
[Operation for displaying faults history]
Past eight faults can be displayed.
(The latest fault is ended by ".".)
When no fault history exists,
∗1
PU operation mode
Output current monitor ∗2
Value change
All parameter clear Faults history clear
IPM parameter initialization
∗3
Trace function
(Example)
∗4
Faults history 2
PU Jog operation mode
Flicker
(Example)
Frequency setting has been
written and completed!!
Output voltage monitor
Display the present
setting
Flicker
(Example)
Parameter write is completed!!
Parameter copy
Initial value change list
(Example)
Flickering Flickering
∗4
Faults history 8
is displayed.
∗1
∗2
∗4