Table of Contents
Advertisement
Huawei Atlas 500
Technical White Paper
3
5
7
9
Description
Table 2-3 Description of ports on the rear panel
Name
Antenna
port
Phoenix
alarm
terminal
port
USB port
GE
network
port
Audio
output port
Issue 03 (2019-08-05)
USB ports
Audio output port
HDMI port
Ground terminal
Type
Quantity
SMA-K
2
(screw
threads
outside and
a hole
inside)
-
1
USB 2.0
2
Type-A
-
2
-
1
Copyright © Huawei Technologies Co., Ltd.
4
GE network ports
6
Audio input port
8
Power socket
-
-
Description
Used to connect antennas to the Atlas 500.
Used to connect an alarm input device such as a
smoke detector, infrared detector, access
controller, or an alarm output device such as an
alarm bell. Ensure that the alarm input device
and Atlas 500 are grounded.
NOTE
It is recommended that the length of an RS232 cable
be less than or equal to 10 m.
Used to connect a mouse. The Atlas 500
provides two USB ports on the rear panel. You
can connect a mouse to either of the ports.
Used to connect to a switch through network
cables.
Used to connect an audio output device such as a
headset or speaker to the Atlas 500.
Figure 2-4 Audio output cable
NOTE
The audio output cable and devices are not included in
the accessory package, and need to be purchased by
customers themselves.
2 Hardware
8
Advertisement
Table of Contents
