Table of Contents
Advertisement
Huawei Atlas 500
Technical White Paper
Name
Audio
input port
HDMI port
Power
socket
Ground
terminal
Issue 03 (2019-08-05)
Type
Quantity
-
1
-
1
-
1
-
1
Copyright © Huawei Technologies Co., Ltd.
Description
Used to connect an audio input device such as a
microphone to the Atlas 500.
Figure 2-5 Audio input cable
NOTE
The audio input cable and devices are not included in
the accessory package, and need to be purchased by
customers themselves.
Used to connect to a monitor through an HDMI
cable for video output.
NOTE
The HDMI cable is not included in the accessory
package, and needs to be purchased by customers
themselves.
Used to connect to the power supply system
through a 2-pin DC power cable. One end of the
cable is a 2-pin DC input terminal, and the other
end is open. Users can prepare cables based on
site requirements. The 2-pin DC input terminal
adopts a foolproof design. If the positive and
negative poles are reversely connected, the
device cannot be powered on. The Atlas 500
installation accessory package provides a 2-pin
power cable terminal. The DC power cable
specifications must be 1.5 mm
(recommended) or smaller.
Figure 2-6 Atlas 500 power cable
Used to connect one end of the PGND cable to
the ground terminal on the device and the other
end to the ground point on the cabinet or
workbench. A Phillips screwdriver and M4
screws are required.
The PGND cable needs to be prepared by the
customer, and a 16 AWG to 18 AWG yellow and
green cable is required.
2 Hardware
2
or 16 AWG
9
Advertisement
Table of Contents
