Using Bindery Remote Printer Mode (Netware 4.X) - Epson 802.11g Reference Manual

12. Specify a priority level between 1 to 10. One is top priority.
13. Press Esc to exit PCONSOLE.
Configuring for NetWare using EpsonNet Config
1. Turn on the device.
2. Load the print server from the file server's system console
which the print queue volume is set.
>LOAD PSERVER print server name you set using
PCONSOLE
3. Configure the network interface using EpsonNet Config. See
the EpsonNet Config Reference Guide for details.
If NetWare objects are already created, you can also use
EpsonNet Config with Web Browser. See "NetWare" for
details.
Using Bindery Remote Printer Mode (NetWare
4.x)
Follow the steps below to make the printer environment on
NetWare 4.x and IntranetWare with Bindery emulation.
Note:
Assign Trusteeships for users if necessary.
Be sure to use PCONSOLE to set the print queue and print server
instead of using NWAdmin.
Creating objects
1. From any NetWare client, log in to the server as an ADMIN.
Make sure to log in with Bindery connection.
226