Epson 802.11g Reference Manual page 86

You can only display or read data on the memory card.
When you access the Network Storage and delete data on the
memory card, the data disappears. However, the data is not actually
deleted so the data appears again when you select Refresh from the
View menu.
Accessing the network storage
The network drive you mapped appears in My Computer. To
display or read the file, double-click the network drive icon.
Note:
When the network drive does not appear in My Computer, connect it
manually. See "Using the network storage" for more details.
Disconnecting the network storage
To disconnect the network drive of the network storage,
right-click the network drive icon, and then select Disconnect.
Changing the network storage information
You can change the host name or the storage name you specified
in the Run dialog box by using EpsonNet Config. For more
detailed information, see EpsonNet Config Reference Guide or
"About EpsonNet Config".
For Macintosh
Configuring the network interface
Configure the network interface for use on the TCP/IP network,
and install the drivers for the all-in-one and the utility on your
computer.
86