Epson 802.11g Reference Manual page 49

1. Click Start, point to All Programs (for Windows XP/Server
2003 users) or Programs (for Windows Me/98/2000 users),
and then select EpsonNet. Click EpsonNet Config to start it.
2. Select the device and then click the Configuration button.
3. Select Basic under Network. Make the following settings.
Items
Communication Mode
Operation Mode
SSID
Channel
Transmission Rate
Explanations
Select a wireless LAN mode: Infrastructure
or Ad Hoc.
For 802.11g only:
Select the operation mode from the list.
Enter or select the SSID (or ESSID) of the
access point or wireless LAN (up to 32
characters).
When the mode is Ad Hoc, select the
channel used on the network interface. If
the mode is Infrastructure, this item is
dimmed.
Select the transmission speed from the list.
49