Epson 802.11g Reference Manual page 228

11. Click Configuration in the Printer dialog box, and select
Parallel from the Printer type pull-down menu.
12. Click Communication. The Parallel Communication dialog
box appears.
13. Select LPT1 for Port; check Polled for Interrupts; and check
Manual load (Remote from Print Server) for Connection
type, then click OK.
14. Click OK in the Printer dialog box.
15. To assign the printer, double-click the Print Server object icon
(created in step 4). The Print Server dialog box appears.
16. Click Assignments and then click Add. From the printer
object list, select the printer object (created in step 8) and click
OK.
17. In the Print Server dialog box, select the assigned printer from
the printer object list, and click the Printer Number button to
set the printer number from 0 to 15, then click OK.
18. To confirm the objects you have assigned, double-click the
Print Server object icon. Click Print Layout, and check that the
print server, printer, and print queue are connected.
Configuring for NetWare using EpsonNet Config
1. Turn on the device.
2. Load the print server from the file server's system console
which the print queue volume is set.
>LOAD PSERVER print server name you set using
PCONSOLE
3. Configure the network interface using EpsonNet Config. See
the EpsonNet Config Reference Guide for details.
228