Motorola MVME2401-1 Installation And Use Manual page 22

Preparing and Installing the MVME2400-Series Module
1
What you need to do ...
Connect any other optional
devices or equipment you will be
using.
Power up the system.
Examine the environmental
parameters and make any
changes needed.
Program the MVME240x module
and PMCs as needed for your
applications.
1-6
Table 1-3. Start-Up Overview (Continued)
Refer to ...
Connector Pin Assignments
For more information on optional devices
and equipment, refer to the documentation
provided with that equipment.
Installing the MVME240x Hardware
Status Indicators
If any problems occur, refer to the section
Diagnostic Tests in Chapter 5, PPCBug.
You may also wish to obtain the PPCBug
Diagnostics Manual, listed in Appendix A,
Ordering Related Documentation.
ENV - Set Environment
You may also wish to obtain the PPCBug
Firmware Package User's Manual, listed in
Appendix A, Ordering Related
Documentation.
Preparing the MVME240x Hardware
Programming the MVME240x
For additional information on PMCs, refer to
thePMC manuals provided with these cards.
You may also wish to obtain the
MVME2400-Series VME Processor Module
Programmer's Reference Guide, listed in
Appendix A, Ordering Related
Documentation.
Computer Group Literature Center Web Site
On page ...
C-1
1-13
2-4
5-10
A-1
6-3
A-1
1-7
4-1
A-1