Unpacking The Mvme240X Hardware; Preparing The Mvme240X Hardware - Motorola MVME2401-1 Installation And Use Manual

Unpacking the MVME240x Hardware

Note
Unpack the equipment from the shipping carton(s). Refer to the packing
list(s) and verify that all items are present. Save the packing material for
storing and reshipping of equipment.
Avoid touching areas of integrated circuitry; static discharge
!
can damage these circuits.
Caution

Preparing the MVME240x Hardware

To produce the desired configuration and ensure proper operation of the
MVME240x, you may need to carry out certain modifications before and
after installing the modules.
The following paragraphs discuss the preparation of the MVME240x
hardware components prior to installing them into a chassis and
connecting them.
MVME240 x
The MVME240x provides software control over most options; by setting
bits in control registers after installing the MVME240x in a system, you
can modify its configuration. The MVME240x control registers are briefly
described in Chapter 4, with additional information in the MVME2400-
Series VME Processor Module Programmer's Reference Guide as listed in
the table Motorola Computer Group Documents in Appendix A, Ordering
Related Documents.
http://www.mcg.mot.com/literature
If the shipping carton(s) is/are damaged upon receipt, request
that the carrier's agent be present during the unpacking and
inspection of the equipment.
Unpacking the MVME240x Hardware
1
1-7