Picture Menu; Picture Mode; Contrast; Brightness - Panasonic PT-FW430E Operating Instructions Manual

PICTURE menu

Select [PICTURE] from the Main Menu (see
"Navigating through the menu" on page 33),
then select the item from the sub-menu.
After selecting the item, press ◄► to set.
z
Remote Control

PICTURE MODE

You can switch to the desired picture mode suitable
for the image source and the environment in which
the projector is used.
1 ) Press ▲▼ to select [PICTURE MODE].
2 ) Press ◄► or the <ENTER> button.
The [PICTURE MODE] screen appears.
z
3 ) Press ◄► to switch the [PICTURE
MODE].
The setting will change as follows each time
z
you press the button.
STANDARD
CINEMA*
1
NATURAL*
2
*1 : During video input
*2 : During still image input
STANDARD
DYNAMIC
BLACKBOARD For projection on a blackboard
WHITE BOARD For projection on a whiteboard
CINEMA
NATURAL
Note
The factory default picture mode settings are [DYNAMIC]
z
for still images and [STANDARD] for video.
It may take a few seconds for the picture to stabilize after
z
a picture mode change.
36
- ENGLISH
Control Panel
DYNAMIC
WHITE BOARD BLACKBOARD
For viewing at normal brightness
For viewing at higher brightness
and sharpness
For natural reproduction of film
sources
For reproduction in a dark room

CONTRAST

You can adjust the contrast of the colors.
1 ) Press ▲▼ to select [CONTRAST].
2 ) Press ◄► or the <ENTER> button.
The [CONTRAST] screen will be displayed.
z
3 ) Press ◄► to adjust the level.
Operation Adjustment
Brightens the screen
Press ►. and makes the color
of image deeper.
Darkens the screen
Press ◄. and makes the color
of image lighter..
Attention
Adjust the BRIGHTNESS in advance if necessary.
z

BRIGHTNESS

You can adjust the dark (black) parts of the projected
image.
1 ) Press ▲▼ to select [BRIGHTNESS].
2 ) Press ◄► or the <ENTER> button.
The [BRIGHTNESS] screen will be displayed.
z
3 ) Press ◄► to adjust the level.
Operation Adjustment
Increases the
brightness of the
Press ►.
dark (black) parts of
the screen.
Reduces the
brightness of the
Press ◄.
dark (black) parts of
the screen.
Adjustment
range
Maximum
value +32
Minimum
value - 32
Adjustment
range
Maximum
value +32
Minimum
value - 32