Dvi-I In; Hdmi In - Panasonic PT-FW430E Operating Instructions Manual

DISPLAY OPTION menu

DVI-I IN

Change this setting if the image is not displayed
properly while signals from an external device are
input to the DVI-I terminal of the projector.
1 ) Press ▲▼ to select [DVI-I IN].
2 ) Press the <ENTER> button.
The [ DVI-I IN] screen will be displayed.
z
3 ) Press ▲▼ to select items and ◄► to
switch settings
DIGITAL/ANALOG
J
Each press of the button switches the settings as
z
shown below.
DIGITAL
Select this when a digital signal is
DIGITAL
input.
Select this when an analog signal is
ANALOG
input.
DVI EDID
J
Each press of the button switches the settings as
z
shown below.
EDID1
Select this when an external device
(DVD player, etc.) for outputting
EDID1 video signals of a moving image
system is connected to DVI-I IN
terminal.
Select this when an external device
(PC, etc.) for outputting video signals
EDID2 (PC)
of a still image system is connected
to DVI-I IN terminal.
48
- ENGLISH
J
Each press of the button switches the settings as
z
shown below.
0-255 : PC
Note
ANALOG
The optimal setting differs depending on the output
z
setting of the connected external device. Refer to the
instruction manual of the external device.
If the setting is changed, the data for plug and play
z
changes. For the plug and play compatible resolutions,
refer to "List of compatible signals" (

HDMI IN

Change this setting if video does not display normally
when the projector and an external device are
EDID2 (PC) connected via HDMI.
1 )
2 )
3 )
Note
The optimal setting differs depending on the output
z
setting of the connected external device. Refer to the
instruction manual for the external device.
The displayed HDMI signal level is the value when the
z
input is 30 bit.
DVI SIGNAL LEVEL
0-255 : PC
Select this when the digital output
from an external device, such as a
computer, is connected to the DVI-I
terminal, or in similar cases.
Select this when the output from the
HDMI terminal of an external device,
16-235 such as a DVD player, is connected
to the DVI-I terminal via a conversion
cable, or in similar cases.
Press ▲▼ to select [HDMI IN].
Press the <ENTER> button.
The [ HDMI IN] screen will be displayed.
z
Press ◄► to switch [HDMI SIGNAL
LEVEL].
Each press of the button switches the settings
z
as shown below.
0-1023
Select this when, for example, a DVI
terminal output of an external device
0-1023
(PC etc.) is connected to HDMI IN
using a conversion cable, etc.
Select this when, for example,
an HDMI terminal output of an
64-940
external device (DVD player, etc.) is
connected to HDMI IN.
16-235
Æ page 81).
64-940