Control Device Setup - Panasonic PT-FW430E Operating Instructions Manual

SECURITY menu

CONTROL DEVICE SETUP

You can enable/disable the button operations of the
Control panel of the main unit and remote cotrol.
1 ) Press ▲▼ to select [CONTROL
DEVICE SETUP].
2 ) Press the <ENTER> button.
The [CONTROL DEVICE SETUP] screen will
z
be displayed.
3 ) Press ▲▼ to select items and ◄► to
switch settings.
If you choose [DISABLE], select [OK] and press
z
<ENTER> button in the confirmation screen
that appears.
CONTROL PANEL
J
Restriction of control from the main unit controls
can be set.
Each press of the button switches the settings
z
as shown below.
ENABLE
Enables control from the main unit
ENABLE
controls.
Disables control from the main unit
DISABLE
controls.
REMOTE CONTROLLER
J
Restriction of control from the remote control can
be set.
Each press of the button switches the settings
z
as shown below.
ENABLE
Enables control from the remote
ENABLE
control.
Disables control from the remote
DISABLE
control.
Note
If you [DISABLE] both of the [CONTROL PANEL] and
z
[REMOTE CONTROLLER] buttons, you cannot turn the
power [OFF] (return to the standby mode).
Cancelling a [DISABLE] setting:
Press the <ENTER> button while holding down
the <MENU> button for 2 seconds on the main
unit controls to reset a [DISABLE] setting on the
"CONTROL PANEL" to [ENABLE].
Use the projector to change [REMOTE
CONTROLLER] settings.
64
- ENGLISH
DISABLE
DISABLE