Dsl - D-Link DVA-2800 User Manual

Section 4 - Configuration
Click the DSL button to see the DSL hardware connection information.
DSL Phy Version: Displays the DSL Phy version.
Cable Status: Displays the current cable status.
DSL Status: Displays the current negotiation state of the DSL port.
Mode: Displays the current DSL mode.
Link Power State: Displays the current link power state.
SNR Margin (0.1 The DSL connection's signal to noise ratio is listed here.
dB):
Attenuation (0.1 The DSL connection's attenuation is listed here.
dB):
Output Power (0.1
The DSL connection's power output is listed here.
dBm):
Attainable Rate The measured maximum attainable rate is listed here.
(Kbps):
Rate (Kbps):
The negotiated connection speed is listed here.
D-Link DVA-2800 User Manual

DSL

DVA-2800 HW:T1
Internet Connected
Click on any item in the diagram for more information.
Internet
DSL Phy Version:
Cable Status:
DSL Status:
Mode:
Link Power State
Home Settings
FW:AU_2.01
Connected Clients:
Internet DVA-2800
G3_01.50.14
Connected SNR Margin (0.1 dB): 121 / 175
Up Attenuation (0.1 dB): 0 / 5
G.993.2_Annex_A Output Power (0.1 dBm): 131 / 135
L0 Attainable Rate (Kbps): 135752 / 226704
Rate (Kbps): 100014 / 127998
COPYRIGHT © 2017 D-Link
Features Management
1
USB Device
DSL / IPv4 / IPv6
UpLink / DownLink
Go to settings
23