Admin - D-Link DVA-2800 User Manual

Section 4 - Configuration
This page will allow you to change the administrator (Admin) password and enable remote
management. In the Management menu on the bar on the top of the page, click Admin. To
load, save, reset settings, or reboot the router, click System and refer to Parental Control
/ Schedule on page 69.
Admin Password
Password: Enter a new password for the administrator account. You will need to
enter this password whenever you configure the router using a web
browser.
Administration
Enable HTTPS
Remote management allows the router to be configured from the
Remote Internet by a web browser. A password is still required to access the web
Management:
management interface. Check to enable HTTPS to have your connection
to the router encrypted with SSL.
Remote HTTPS The port number used to access the router is used in the URL. Example:
Admin Port:
https://x.x.x.x:8080 where x.x.x.x is the Internet IP address of the DSL-
3590L and 8080 is the port used for the web management interface.
Enable HTTP Remote management allows the router to be configured from the
Remote
Internet by a web browser. A password is still required to access the web
Management: management interface. With this setting off, the UI is only available from
the local network.
Remote HTTP
The port number used to access the router is used in the URL. Example:
Admin Port: http://x.x.x.x:8080 where x.x.x.x is the Internet IP address of the DSL-3590L
and 8080 is the port used for the web management interface.
Note: If you enabled HTTPS Server and wish to access the router remotely
over an encrypted connection, you must enter https:// at the beginning
of the address.
D-Link DVA-2800 User Manual

Admin

72