Bridged - D-Link DVA-2800 User Manual

Section 4 - Configuration
Select Bridge to configure the device as a network bridge.
IPv4 Settings:
Select Bridged.
My Internet
Connection is:
LAN Interface: Choose the interface to bridge.
Advanced Settings
MTU Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP. Select either Auto or Manual.
Secondary DNS Enter the secondary DNS server IP address assigned by your ISP. This
Server: address is usually obtained automatically from your ISP.
Enable NAT: Enable or disable Network Address Translation.
Bridged Mode does not support IPv6 configuration. Click Save when you are done.
D-Link DVA-2800 User Manual

Bridged

IPv4 SETTINGS
⌵
My Internet Connection is: Bridge
⌵
LAN Interface: LAN 1
⌵
MTU: Auto
Advanced Settings ...
37