Access Panel; Front Bezel - HP EliteDesk 800 G3 SFF Maintenance And Service Manual

Access panel

1. Prepare the computer for disassembly
2. Slide the access panel release lever to the left (1) so that it locks into place. Then slide the access panel
back (2) and lift it off the computer (3).
To install the access panel, reverse the removal procedure.

Front bezel

1. Prepare the computer for disassembly
2. Remove the access panel
3. Lift up the three tabs on the top of the bezel (1), and then rotate the bezel off the chassis (2).
To install the front bezel, reverse the removal procedure.
(Preparation for disassembly on page
(Preparation for disassembly on page
(Access panel on page 21).
20).
20).
Access panel 21