Hard Drive Cage - HP EliteDesk 800 G3 SFF Maintenance And Service Manual

5. Connect the power cable (1) and data cable (2) to the rear of the hard drive.
NOTE:
dark blue SATA connector on the system board labeled SATA0. If it is a secondary hard drive, connect the
other end of the data cable to one of the light blue SATA connectors on the system board.
6. Reassemble the computer.

Hard drive cage

1. Prepare the computer for disassembly
2. Remove the access panel
3. Rotate the drive cage to its upright position.
If the 3.5-inch hard drive is the primary drive, connect the other end of the data cable to the
(Access panel on page
(Preparation for disassembly on page
21).
20).
Drives 41