FInstalling SD card reader
1
Insert the SD card reader into the slot on the system board.
2
Replace the screw(6+/-1) to secure the SD card reader to the front panel door.
NOTE:
The screw holder is beneath the SD card reader.
3
Connect the SD card reader cable to the connector on the system board.
4
Close the front panel door.
5
Install the:
a
Front bezel
b
Back cover
6
Follow the procedure in
Memory modules
Removing memory module
1
Follow the procedure in
2
Remove the:
a
Back cover
b
Front bezel
3
Open the
Front panel
4
To remove the memory module:
a
Pull the clips securing the memory module until the memory module pops up.
b Lift the memory module from the connector on the system board.
Installing memory module
1
Align the notch on the memory module with the tab on the connector.
2
Insert the memory module into the connector.
3
Press the memory module until the memory module retention tabs click into place.
4
Close the front panel door.
5
Install the:
a
Front bezel
b
Cover
6
Follow the procedure in
After working inside your
Before working inside your
door.
After working inside your
computer.
computer.
computer.
Disassembly and reassembly
25