Removing intrusion switch
1
Follow the procedure in
2
Remove the:
a
Back cover
b
Front bezel
3
Open the
Front panel
4
To the intrusion switch:
a
Disconnect the intrusion switch cable from the connector on the system board [1].
b Un-route the intrusion switch cable from the cable holder.
c
Slide the intrusion switch and push it to remove from the computer [2].
Installing intrusion switch
1
Insert the intrusion switch into the slot on the computer.
2
Route the intrusion switch cable through the cable holder.
3
Connect the intrusion switch cable to the connector on the system board.
4
Close the front panel door.
30
Disassembly and reassembly
Before working inside your
door.
computer.