Installing The Vga Daughter Board - Dell OptiPlex 5055 Tower Owner's Manual

Installing the VGA daughter board

1 Align the VGA daughter board with the screw holder on the system board.
2 Tighten the screw to secure the VGA daughter board to the system board.
3 Insert the VGA connector into the slot at the back of the computer.
4 Tighten the screws to secure the VGA connector to the computer.
5 Close the Front Panel
6 Install the:
a Bezel
b Back Cover
7 Follow the procedure in
Door.
After working inside your computer.
Disassembly and reassembly 41