Power Switch; Removing Power Switch - Dell OptiPlex 5055 Tower Owner's Manual

5 Install the:
a Front bezel
b Back cover
6 Follow the procedure in

Power switch

Removing power switch

1 Follow the procedure in
2 Remove the:
a Back cover
b Front bezel
3 Open the Front panel
4 To release the power switch:
a Disconnect the power switch cable from the system board [1].
b By using plastic scribe remove the power switch cable through the retention clip [2].
c Press the release tabs using a plastic scribe and slide the power switch out from the front of the computer [3].
d Close the front panel door [4].
5 Pull the power switch out from the computer.
After working inside your
Before working inside your
door.
computer.
computer.
Disassembly and reassembly 31