D-Link Covr-C1203 User Manual page 25

Section 3 - Configuration
The default MAC address is set to the physical interface MAC address
MAC Address
of port 1 on Covr Point A. You can use the drop-down menu to replace
Clone:
the Internet port's MAC address with the MAC address of a connected
client.
If you selected Static IP as the Address Mode:
Enter the IP address provided by your ISP.
IP Address:
Enter the ISP service name (optional).
Service Name:
Enter the primary DNS server IP address assigned by your ISP.
Primary DNS
Server:
Enter the secondary DNS server IP address assigned by your ISP.
Secondary DNS
Server:
Maximum Transmission Unit - you may need to change the MTU for
MTU:
optimal performance with your ISP.
The default MAC address is set to the physical interface MAC address
MAC Address
of port 1 on Covr Point A. You can use the drop-down menu to replace
Clone:
the Internet port's MAC address with the MAC address of a connected
client.
Click Save when you are done.
D-Link COVR-C1203 User Manual
PPPoE (continued)
21