D-Link Covr-C1203 User Manual page 32

Section 3 - Configuration
Select Auto Detection to automatically detect the IPv6 connection method
used by your Internet Service Provider (ISP). If Auto Detection fails, you can
manually select another IPv6 connection type.
IPv6 DNS Settings
Select either Obtain DNS server address automatically or Use the
DNS Type:
following DNS address.
If Use the following DNS address is selected:
Enter the primary DNS server address.
Primary DNS
Server:
Enter the secondary DNS server address.
Secondary DNS
Server:
LAN IPv6 Address Settings
Enable or disable DHCP Prefix Delegation.
Enable DHCP-PD:
Displays Covr Point A's LAN link-local address.
LAN IPv6 Link-
Local Address:
If Enable DHCP-PD is disabled, these additional parameters are available for configuration:
Enter a valid LAN IPv6 address.
LAN IPv6 Address:
Displays Covr Point A's LAN link-local address.
LAN IPv6 Link-
Local Address:
D-Link COVR-C1203 User Manual
Auto Detection
28