Section 3 - Configuration
This page will allow you to upgrade the extender's firmware, either
automatically or manually. To manually upgrade the firmware, you must first
download the newest firmware file from http://support.dlink.com.
In the Management menu on the bar on the top of the page, click Upgrade.
Firmware Information
Displays the current firmware version and date for Covr Point A (master)
Current Firmware
and any additional Covr Points unit (extender).
Version/Date:
Click this button to prompt the extender to automatically check for a new
Check for New
firmware version. If a newer version is found, click Upgrade Firmware
Firmware:
to download and install the new firmware.
Upgrade Manually
If you wish to upgrade manually, first download the firmware file you
Upgrade
wish to upgrade to. Next, select a device from the drop-down menu to
Firmware:
upgrade firmware for. Then, click the Select File button and browse to
the firmware file you want to install. With the file selected, click Upload
to begin the upgrade process.
D-Link COVR-C1203 User Manual
Upgrade
67