NEC CHIEF K3F220 Installation Manual page 15

8. Loosen the 2 hex screws
arm height adjustment
One person should hold the monitor to prevent it from
moving while loosening the hex screws
9. Place a spacer on the top of the lower right monitor
and on the side of the upper left monitor
10. Carefully lower the upper right monitor
11. After the upper monitor height is in the desired
position, tighten the hex screws to fix the arm in
place
12. Follow steps 5 and 6 above to move the upper right
monitor into position towards the center pole
Keep the spacers in place while positioning the upper
right monitor
Ⓔ
13. Tighten the knob
horizontal position
Ⓐ Ⓑ
/ , for the upper right
on the back of the arm to fix the
2 x 2 mUlti-monitoR installation (K3F220/K3g220) | 15
CHIEF STAND INSTALLATION MANUAL | USER'S GUIDE
Ⓐ
Ⓑ