Installing the Lower Left and Lower Right Monitors
Set the Vertical Arm Position
1. Loosen the 4 hex screws
adjustment
2. Adjust the height of the arms until the left and right
are at the desired height
3. Tighten the hex screws to fix the arms in place.
Make sure the arms are at the same height before
tightening the hex screws
4. Loosen the hex screw
left and right VESA plates so they can be adjusted
by hand
ⓘ
loosen the hex screw, do not remove it.
Ⓐ
Ⓑ
/
for height
Ⓒ
Ⓓ
and knob
of the lower
2 x 2 mUlti-monitoR installation (K3F220/K3g220) | 9
Ⓐ
Ⓑ
Ⓓ
Ⓒ
CHIEF STAND INSTALLATION MANUAL | USER'S GUIDE
Ⓐ
Ⓑ