Fujitsu 420D User Manual page 113

S e c t i o n F i v e
Problem
You cannot access the floppy disk.
A card inserted in the PC Card slot does not
work or is locking up the system.
106
Possible Cause
1. Security is set to protect access to floppy
disk data.
2. Diskette is not loaded correctly.
3. BIOS Setup Utility has Diskette Controller
as Disabled.
4. The Floppy Disk Drive may not be
properly installed.
5. You tried to write to a write protected
diskette.
1. The card is not properly installed.
2. The card may have been installed with an
application running and your notebook doesn't
know it is there.
3. The software may not have the correct
software driver active.
Possible Solution
1. Verify your password.
2 . E j ect disket te and ch eck ori en t a ti on and
re - i n s ert . (See Floppy Disk Drive on pa ges 32–34.)
3. Revise the Setup Utility Integrated
Peripherals Submenu settings. (See Advanced
Menu on pages 60–63.)
4. Remove and re-install the floppy disk drive.
(See To Install or Remove a Device for the Multi-
function Bay on pages 86–87.)
5. Eject the diskette and set it to w rite enable.
(See page 33.)
1. Remove and re-install the card. (See Installing
a PC Card on pages 81–83.)
2. Close the application and restart your
notebook.
3. See the software documentation and activate
the correct driver.