Fujitsu 420D User Manual page 63

These parameters are controlled by the
selection made for Type:
Cylinders:
Sets the number of cylinders for the hard
disk drive. This is a number up to five digits
which can be set by incrementing or typing
in the number.
Head:
Sets the number of heads on the hard disk
drive. This is a number between 1 and 16
which can be set by incrementing or typing
in the number.
Sectors/Track:
Sets the number of sectors on the hard disk.
This is a number between 0 and 63 which
can be set by incrementing or typing in
the number.
Write Precomp:
Sets the amount of write compression to be
used in storing data on the hard disk. This is
None or a number up to four digits which
can be set by incrementing or typing in
the number.
C o n f i g u r i n g Y o u r L i f e B o o k 4 0 0 S e r i e s
Multi-Sector Transfers:
Sets the number of sectors allowed in a
block transfer. This is Disabled or 2,4,6, 8
or 16 sectors.
LBA Mode Control:
Enables or disables Block Addressing in place
of Cylinder, Head, Sector addressing.
Transfer Mode:
Selects the data movement method for the
hard disk. The options are Standard or Fast
PIO 1 – Fast PIO 4.
The 32 Bit I/O parameter is not controlled by
the selection made for T y p e :
32 Bit I/O:
This allows you to enable or disable 32 bit
data transfers.
Enabling Memory Cache:
The Memory Cache Field lets you enable
or disable the memory cache feature. The
options are Enabled or Disabled. The default
is Enabled.
L i f e B o o k 4 0 0 S e r i e s f r o m F u j i t s u
55