Access Actuator - Huawei FusionDC1000A Manual

FusionDC1000A Prefabricated All-in-One Data
Center
Product Description (IT Scenario)
Specifications
Table 6-24 Technical specifications of a smart ETH gateway
Item
Power input
Power
output
FE port
PoE port
BLINK
button

6.5 Access Actuator

The access actuator is the control component for the door. It connects to the
ECC800-Pro controller system over FE port or wireless networking (802.15.4). It
opens the magnetic lock by detecting the card swiping information of the card
reader, door open button information, and equipment room fire linkage
information. It has access right management, access event record, and alarm
record functions.
Issue 01 (2021-04-20)
Specifications
PWR_IN D-type power input terminal, for power cascading, input
voltage range: 45–55 V DC
● PWR_OUT D-type power output terminal, for power
cascading, output voltage range: 45–55 V DC
● 48V_OUT1 and 48V_OUT2, Phoenix terminal, output voltage
range: 45–55 V DC
Two FE ports, RJ45 terminal with an indicator, 10/100M
communication rate, for the cascading between smart ETH
gateways and the communication with the host
Four PoE ports, RJ45 terminal with an indicator, 10/100M
communications rate, complying with IEEE802.3at
If you press the BLINK button, the RUN indicator blinks
intermittently at super short intervals (blinking at super short
intervals for 0.5s and then off for 0.5s) for 10s.
Copyright © Huawei Technologies Co., Ltd.
6 Management System
81