Huawei FusionDC1000A Manual page 9

FusionDC1000A Prefabricated All-in-One Data
Center
Product Description (IT Scenario)
●
●
●
●
●
●
Rapid Deployment
●
●
●
●
Issue 01 (2021-04-20)
standard. The pre-fab. module uses mature welding technologies in the
industry to implement all-round airtight, dustproof, and waterproof
protection.
Bulletproof: The bulletproof function can be customized. Customization will
change the structure of the pre-fab. module. Side plates of the pre-fab.
module are 4.2 mm bulletproof steel plates and top plates are 2.4 mm
bulletproof plates. The design meets the GJB 4300-2002 V and N.I.J.0108.01
IIIA standards (distance of 10 m, 56-type 7.62 mm submachine gun or
AK47-7.62X39, initial bullet speed greater than 710 m/s).
Antiseismic: The pre-fab. module meets GR-63-CORE Zone 3 antiseismic
requirements.
Theftproof: The intelligent access control system and mechanical locks provide
multifold security protection and can meet class 3 theftproof requirements in
EN 1627–EN 1630 if required.
Adaptive to environment: The design of two porches prevents sand from
entering the equipment compartment when doors are open during
maintenance, ensuring that the pre-fab. module applies to various harsh
environments.
Fireproof: The fire extinguishing system is reliable, clean, insulating, and
environment-friendly, and can put out a fire efficiently and safely without
damaging equipment, thereby ensuring high equipment availability. The fire
extinguishing system uses heptafluoropropane as the extinguishing agent and
complies with the EU's CE certification.
Certification: The 380 V 2N scenario complies with Uptime Tier III design
certification.
Streamlined manufacturing, professional division of labor, and good work
conditions ensure that modules and products of the FusionDC1000 are
produced efficiently with strict quality control.
Infrastructures such as cooling equipment, power supply equipment, and
racks are factory-installed. You only need to provide network cables, power
cables, and water pipes onsite for commissioning.
System commissioning is completed in factories, and therefore onsite
deployment and equipment room commissioning take less than one week.
The pre-fab. module can be easily relocated as it can be transported on
level-3 roads and applies to various scenarios such as dynamic data service
deployment, military affairs, disaster relief, and field operations.
Copyright © Huawei Technologies Co., Ltd.
1 Overview
2