Advertisement
Socket Modules for Low Power Devices
The six socket modules for low power devices have FORCE terminals only. Up to 3 SMU
channels can be connected to DUT by Kelvin Connection. As shown in the example in
Figure 1-3, use miniature banana—pin plug connection cables to connect both FORCE
and SENSE terminals of HP 16442A to the FORCE terminal on the socket module as
follows: insert one pin plug into the FORCE terminal of the socket module, then insert
the other pin plug into the tail hole of the inserted pin plug.
Figure 1-3. Mounting DUT on Socket Module for Low Power Devices
To connect sense terminals as near as possible to the DUT, connect the SENSE
terminals of HP 16442A directly to the DUT with the miniature banana – miniature clip
connection cables as shown in following figure.
HP 16442A User's Gude 9
Advertisement
