Toro LT-F3000 Installation Instructions Manual page 15

Figure 42
1. Nut (negative
battery-cable terminal)
2. Tighten the forward nut and T-bolt
the negative battery cable terminal.
Installing the Storage
Compartment
Models 31657 and 31659
1. Align the holes on the bottom of the storage
compartment with the holes in the chassis
brackets.
2. Assemble the storage compartment to the
machine with the 3 knobs and 3 washers
43).
Figure 43
1. Washer
2. Knob
3. Close the storage-compartment door.
g344733
2. Negative battery post
(Figure 42) of
(Figure
g328512
3. Storage compartment
Checking for Hydraulic Leaks
1. Lower the platform carefully
Note:
The gas lift cylinder helps support the
platform.
2. As the platform nears the fully lowered position,
move the platform-latch handle
toward the front of the machine.
Note:
This ensures that the latch hooks clear
the locking bar.
1. Platform-latch handle
3. Fully lower the platform and move the
platform-latch handle toward the rear of the
machine until the latch hooks fully engage the
locking bar (Figure
15
(Figure 44).
Figure 44
(Figure
Figure 45
2. Locking bar
46).
g290371
45)
g290369