Toro LT-F3000 Installation Instructions Manual page 8

Assembling the Transmission
Manifold to the Machine
1. Align the front transmission manifold to the
chassis beam as shown in
Figure 20
1. Front of the machine
2. At the bottom of the machine, assemble the
transmission manifold to the chassis beam
(Figure 21) with the 3 capscrews (10 x 25
mm), washers (10 mm), and lock washers (10
mm) that you removed in
Parking-Brake Solenoid (page
Figure 20.
g342834
g342885
Disconnecting the
6).
1. Transmission manifold
2. Chassis beam
3. Washer (10 mm)
3. Torque the capscrews to 23 to 39 N∙m (17 to 21
ft-lb).
8
Figure 21
4. Lock washer (10 mm)
5. Capscrew (10 x 25 mm)
g342723
g342886