Mitsubishi Electric MELSEC iQ-R Series Introduction Manual page 44

Event history setting
Operating procedure
1.
Change the save destination to the memory card, and click [Apply].
[Navigation] window  [Parameter]  Module to be used  [CPU Parameter]  [RAS Setting]  [Event History Setting]
• For details on the event history setting, refer to the following.
Page 93 Event History Function (Saving Device/Label Operations)
• When setting the save destination to the memory card, an SD memory card must be inserted to the CPU
module.
4 PROGRAMMABLE CONTROLLER SETTINGS
43
4.4 Parameter Settings of CPU Module
Click here after setting.