Network Camera Settings - Mitsubishi Electric MELSEC iQ-R Series Introduction Manual

3.1

Network Camera Settings

Use a web browser to configure the network camera settings. When the network camera is started for the first time, network
settings such as the IP address setting are required. From the second time, you can access the network camera only by
entering the password.
ONVIF supported network camera M1065-L
■Initial start-up setting
Operating procedure
1.
Enter the IP address of the network camera in the web browser.
The IP address of the network camera can be checked on the network by using AXIS IP Utility.
AXIS IP Utility can be downloaded from the following URL.
www.axis.com/en
2.
When the web server is accessed, the administrator password setting window appears.
Set a password and the language, and click the [Create login] button.
3 CAMERA SETTINGS
3.1 Network Camera Settings
3
10