Creating The Screen; Writing - Mitsubishi Electric MELSEC iQ-R Series Introduction Manual

5.4

Creating the Screen

As an example, create and use the following GOT screen corresponding to the program of "Page 45 Creating a
Program".
5.5

Writing

Write the project data to the GOT. Then, reset the GOT or turn off and on the power.
Operating procedure
1.
Configure the connection setting for the personal computer, and click the [OK] button.
[Communication]  [Write to GOT] from the menu
Configure the settings
as shown on the right.
5 GOT SETTINGS
53
5.4 Creating the Screen