Hitachi 61HDX98B Manual page 81

DP-85 DIGITAL CONVERGENCE ALIGNMENT PROCEDURES
Convergence 3x3 Point Adjustment Mode
(Green Coarse Alignment )
Press the Remote "USER"
button to enter the Green
button 5 times to enter the
"USER" Button
is used for
selecting the
3X3
Adjustment
Mode (when
pressed 5
times).
Use the Remote 2, 4, 5, 6 number
buttons to move the Adjustment
Point location
blinking cursor)
Buttons to adjust the lines so that
Cursor blinks
the green cross hatch align
at intervals
of 3 to
indicate the
3X3
Adjustment
Mode
Remote
2
4 5 6
Moves location of
Adjustment Point
(Intersection of
blinking cursor)
B
Adjustment Mode
Press the Remote USER
3X3 Adjustment Mode
Press the Remote
MENU button to
project the green
tube only
(intersection of
and the Cursor
with the Overlay (Jig)
Before Adjustment
C
Continue on next page
(The 3X3 Mode
can only be
entered when
the DCU RAM
data is cleared)
Green Only
Remote
USER
Selects GREEN
3X3 Mode =
9 Adjustment Points
Remote
MENU
FAV FAV
CH
CH
Adjusted by cursor keys
After Adjustment
Lines symmetrically
aligned at Adjustment
Points
P A G E 0 8 - 31