Hitachi 61HDX98B Manual page 90

DP-85 DIGITAL CONVERGENCE ALIGNMENT PROCEDURES
Convergence Touchup
Overlays NOT required!
Convergence Point Adjustment
IMPORTANT: Begin in FULL mode.
Enter the Service Mode by pressing the " Service Only
Switch" on Deflection PWB.
Press the " MENU" button to Remove
colors not being adjusted.
Press following for Selected Color to Adjust;
USER = Green 0 = Red INPUT = Blue
Press "0" five times to select the 7X5 Mode
Press "INPUT" five times to select the 13X9 Mode
Note: 3X3 mode can not be entered without clearing ROM data.
Press "2, 4, 5, 6" to move Adjustment Point
Press cursor Up / Down / Left / Right to Adjust Convergence
When adjustment is complete, STORE the New
DATA by pressing the SWAP button twice.
After Storing, initialize the MAGIC FOCUS by pressing the SWAP
button ONCE and then press the PIP CH button.
See "Complete Digital Convergence Alignment procedure" for more
details.
1 2
After Smooth/Wide
Press the Service Only Switch
has been completed
to Exit to Normal mode.
Set display mode
Touch Up
to Smooth/Wide mode
complete
P A G E 0 8 - 40