Table of Contents
Advertisement
Project Planning Manual | Rexroth IndraControl VAU 01.1Z
2
Important Instructions on Use
2.1
Appropriate Use
2.1.1
Introduction
2.1.2
Areas of Use and Application
2.2
Inappropriate Use
Rexroth products represent state-of-the-art developments and manufacturing.
They are tested prior to delivery to ensure operational safety and reliability.
Therefore the products may only be used for the intended purpose. If they are
not used as intended, situations causing personal injury as well as material
damage can occur.
Bosch Rexroth disclaims as manufacturer any warranty, liability or
damages occurring due to inappropriate use of the products. Fur‐
thermore, Bosch Rexroth is not paying any compensation. The user
is responsible for any risks resulting from inappropriate use of the
products.
Before using Bosch Rexroth products, the following requirements must be met
to ensure appropriate use of the products:
●
Anyone handling one of the Rexroth products in any way has to read and
understand the respective safety-related guidelines as well as the instruc‐
tions on appropriate use.
●
Hardware products have to remain in their original state, i.e. no modifica‐
tion regarding the design is allowed. Software products must not be
decompiled and their source codes must not be modified.
●
Damaged or faulty products must not be implemented or put into opera‐
tion.
●
It must be ensured that the products are installed as specified in the doc‐
umentation.
The may only be used with the accessories and add-on components
specified in this documentation. Components not named expressly
mentioned must neither be mounted nor connected. The same ap‐
plies to cables and conduits.
An operation may only be carried out in the hardware component
configurations and combinations specified and with the software
and firmware specified in this documentation and in the corre‐
sponding functional description.
The UPS may only be operated under the assembly and installation conditions,
in the position of application and under the ambient conditions (temperature,
degree of protection, humidity, EMC, etc.) specified in this documentation.
The application of the UPS that are not within the specified areas of application
or under operating conditions deviating from the operating conditions and tech‐
nical data specified in the documentation is considered as "inappropriate".
The UPS must not be used if
●
it is exposed to operating conditions that do not fulfill the ambient condi‐
tions specified. For instance, operation under water, in case of extreme
Electric Drives
| Bosch Rexroth AG
and Controls
Important Instructions on Use
5/45
Advertisement
Table of Contents
