NEC BladeServer Express5800 Series User Manual page 143

Is the system used when Windows Server 2003 and Linux are not started?
→ Use the keyboard only when the USB floppy disk drive is not being accessed (the
access lamp is off).
– Press F6, S, and Enter in installation by using the Windows Setup Disk.
– Start of ROM-DOS Startup FD for command input
Inserted the correct CD-ROM but the following message is displayed:
The CD-ROM is not inserted or the wrong CD-ROM is inserted.
Is the data side of the CD-ROM dirty or damaged?
→ Take the CD-ROM out of the DVD-ROM drive, confirm that it is not dirty or
damaged, reset it, and click [OK].
Fails to access the DVD/CD-ROM:
Is the DVD/CD-ROM properly set in the DVD-ROM drive tray?
→ Take the disc out of the tray, and set the disc with its label side upward.
Is the DVD/CD-ROM compatible with the server?
→ A DVD/CD-ROM for Macintosh is not supported.
→ A disk which does not conform to the CD standard is not guaranteed to work in
the DVD drive.
Please insert the correct CD-ROM.
OK
Troubleshooting 8-11