NEC BladeServer Express5800 Series User Manual page 147

The Telnet Service is not installed:
Adjust the computer name to 14 characters or less before installing the telnet service.
<How to install the Telnet Service>
1.
Click [Run] on the Start menu.
2.
Type "tlntsvr /service" in the [Open] box and click [OK].
3.
Click the Start menu, click [Control Panel], click [Computer Management], and then click
[Services] to check that the telnet service is registered.
* When the installation of Telnet Service is finished, adjust the computer name to 15
characters or more.
Fails to start the operating system with the /3GB switch:
→ System fails to start the operating system with the /3GB switch.
In this case, adjust the capacity of the user mode area using the /userva switch by
referring to the following URL:
http://support.microsoft.com/kb/316739/en
Troubleshooting 8-15