Resetting The Cpu Blade - NEC BladeServer Express5800 Series User Manual

RESETTING THE CPU BLADE

This section describes how to reset the CPU blade when the CPU blade halts or when you want to
restore the factory-set BIOS configuration.
IMPORTANT:
operating system is running. Make sure all data is saved to disk before
resetting the CPU blade.
Hardware reset
Press the RESET switch on the CPU blade. This restarts the CPU blade.
Software reset
If the CPU blade halts before starting the operating system, press and hold Ctrl and Alt
and press Delete. This restarts the CPU blade.
Resetting the CPU blade results in data loss if the
RESET switch
1
2
ID
Troubleshooting 8-29