Names And Features Of Component; Cpu Blade - NEC Express5800 Series User Manual

Chapter 1 General Description
4.

Names and Features of Component

This section describes the names and features of the components in the device.
4.1

CPU Blade

This section describes the names, installation positions, and features of the sections on the CPU blade.
CPU blade
<1> B120d
(14)
(13)
(1) Connector for HDD cage cable
Connect a cable when connecting HDD cage (not
used in HDD-less configuration).
(2) Connector for RAID Controller
Connect a cable when connecting RAID Controller
(N8403-059).
(3) Socket for processor #2 (CPU #2)
Socket tor optional processor #2 (CPU #2)
(CPU#2 and CPU heat sink are not installed.)
(4) Socket for processor #1 (CPU #1)
Socket for processor #1 (CPU #1)
(CPU #1 and CPU heat sink are factory-installed.)
(5) DIMM socket (CPU#2)
CPU2_DIMM6, CPU2_DIMM3, CPU2_DIMM5,
CPU2_DIMM2, CPU2_DIMM4, CPU2_DIMM1
from top
(6) DIMM socket (CPU#1)
CPU1_DIMM1, CPU1_DIMM4, CPU1_DIMM2,
CPU1_DIMM5, CPU2_DIMM3, CPU2_DIMM6
from top
(7) Connector for HDD cable
Connect a cable when connecting HDD (not used
in HDD-less configuration).
26
(1) (2) (3)
(6)
(5)
(8)
(9)
(10) Connector for EXPRESSBUILDER Assembly
(11) Connector for TPM
(12) Connector for LAN riser card
(13) SUV connector
(14) Eject lever
Express5800/B120d, B110d User's Guide
4. Names and Features of Component
(4)
Mezzanine card slot (Type 2)
Slot to install mezzanine card for blade. The slot
number is "MEZ2".
Mezzanine card slot (Type 1)
Slot to install mezzanine card for blade. The slot
number is "MEZ1".
Kit
Connector to install a card for EXPRESSBUILDER
Assembly Kit.
Connector to install TPM.
Connector to install LAN riser card.
(7)
(8)
(10)
(9)
(12) (11)